General Trading - Products

IND | EN

We provide some materials and equipment (machines) as follows:

A. Refractories materials consist of:

  1. Monolithic Refractories material such as standard castables, low cement castables, insulating castables, plastic and plaster (ramming) refractory, high-temperature gunning materials, dense gunning material, shotcrete material, Phosphate Bonded Wet Mortars & precast sections materials used temperature range 1100°C till 1800°C.
  2. Magnesia Product for Electric Arch Furnace in Steel Melting Plant consist of ramming material, fettling material, gunning material use for Electric Arc Furnaces, Hot repair Fetling Mass for Electric Arc Furnaces, Cold Mag for Tundish, Dry Vibe material for tundish, coating material for tundish, EBT Filling material, Dead-Burned Magnesite (DBM) and Sintered Magnesite.
  3. Refractories material for Induction Furnace consists of Dry ramming refractory materials type Alumina Spinel, Alumina Silica (mullite), Silica for kitchen induction, cement coil mudding, plastic material, Topping materials, Patching materials, mica and etc.
  4. Firebrick – Refractory Firebrick consists of clay firebricks, medium alumina firebricks, high alumina firebricks, Insulation Firebricks, Lightweight Insulation Firebicks dan Mortar/cement with content Alumina, Chamotte, Corundum, Bauxite, Silimanite, Mullite dan Zirconia.
  5. Refractory Firebrick (Magnesia) with content Magnesia, Magnesia – Carbon, Alumina Magnesia Spinel brick and Magnesia Chrome brick which is commontly used in Steel Mills and other industries.
  6. Achoring system & Steel Fibre untuk refractory.
  7. Crucible & Special shape refractory.
  8. Pre-cast refractory product.
  9. Functional Refractories

 

B. Blasting materials, Abrasive materials and Polishing (Surface fishing) materials consist of:

  1. Steel Shot, Steel Grit, Low Carbon Bainite Steel Shot and Steel Grit for Granite Cutting.
  2. Stainless Steel Shot, Stainless Steel Cut Wire, Alumunium Cut Wire, Zinc Shot, Steel Balls, Alumunium Shot, Copper Cut Wire, and etc.
  3. Brown Alumunium Oxide, White Alumunium Oxide, Silicon Carbide, Garnet, Glass Beads, and etc.
  4. Plastic blasting materials like Type II Urea, Type III Melamine, Type V Acryclic, Polyamade Natural and Polycarbonate.
  5. Polishing and Grinding Product
  6. Abrasive Grain

 

C. Insulating materials consist of:

  1. Ceramic fiber products in the form of Board, Blanket, Bulk, Paper, Rope, Tape and etc.
  2. Mineral Wool (Rockwool)
  3. Calcium Silicate
  4. Glass Wool
  5. Low Thermal Conductivity – Insulation material

 

D. Machine, material consumable, and equipment for Foundry and Steel Mills:

  1. Foundry Plant
  2. Foundry Ladles
  3. Cores-making equipment
  4. Chemical consumable products for foundry
  5. Shot blasting machine, abrasive blasting equipment, and spare parts
  6. Equipment for the installation of refractory materials
  7. Grinding material

More information, please contact our Sales Engineer, or contact us here.