The specific gravity of Zinc Cut Wire is 2.5 times higher than aluminum. The superior performance of deburring by Zinc Cut Wire is mainly due to its high specific gravity. Zinc Cut Wire has lower cycle time for deburring process and lower media consumption. The tone of finish work surface is close to plan white.
Applications:
Zinc Cut Wire is best suited for deburring the type of metals such as Aluminum Alloys products, Magnesium Alloys Products and Zinc Alloys products for
Automotive Parts, Motorcycle parts, Electrical appliances, Construction, etc.
Chemical composition:
Zn: 99.00 % min, Cu: 0,3 – 1.0 %, Cd: 0.001%, Pb: 0.0014%, Fe: 0.002 max
Mechanical Properties
| Type of abrasive | : AZ |
| Hardness | : 60 – 65 HV |
| Spec Gravity | : 7.1 kg/m3 |
| Density | : 4.2 kg/m3 |
| Average | : low |
| Deburring effect | : high |
| Finish Tone | : normal |
| Size | : from 0.60 mm up to 3.2 mm |
For further information, you can contact our Sales Engineer, or you can contact us directly or here.