Zinc Granule

For polishing and sandblasting media. Zinc granules are used in the laboratory for the preparation of hydrogen because the impurity present in granulated zinc is copper, whose catalyzing effect speeds up the rate of the reaction.

Chemical Composition

Zn≈98.55%, Ni≈0.003%, Fe≈0.004%, Al≈0.014%, Cu≈1.354%, Mg≈0.005% and Pb≈0.0015%   

Mechanical Properties

Hardness 150 HV
Spec Gravity 7.1 kg/m3
Bulk Density 4.2 kg/m3

Size:

2.5 – 3.5mm, 4.0 – 6.0mm & 5.0 – 7.0mm. Other sizes are available upon request.

Stainless Steel Shots Stainless Steel Cut Wire Zinc Shot Zinc Cut Wire Alumunium Cut Wire
Alumunium Shot Copper Cut Wire Copper Cut Wire (Brass) Steel Balls Zinc Granule
Stainless Steel Ball Stainless Steel Shot (Non Magntic)

Please see our Sandblasting media:

Sand Blasting Media (Steel) Sand Blasting Media (Stainless Steel) Sand Blasting (Mineral) media Sand Blasting Plastic media Mass Polishing (Surface Finishing) Media
Grinding Media (Ceramic) Abrasive Grain Products

Please see our Sandblasting & Shot Blasting Equipments:

High Pressure SandBlasting Nozzle Low Pressure SandBlasting Nozzle SandBlasting Machine type SandBlasting Cabinet SandBlasting Machine type SandBlasting Pot Mass Polishing Tools (Surface Finishing)
SandBlasting Machine type Shot Blasting Machine & Spareparts SandBlasting Equipment (Nylon Nozzle/Coupling/Portable Internal Pipe Tool & SandBlasting Gun) SandBlasting Safety Equipment (Blast Suit, Helmet, Hood, Gloves, Breathing Air Filter) Focusing Tube (Water Jet Nozzles)

For further information, you can contact our Sales Engineer, or you can contact us directly or here.