SandBlasting Media – Metal – Steel Shot

IND | EN

Picture 3.6.1.1 - 01
Picture 3.6.1.1 - 02
Picture 3.6.1.1 - 03

General chemical composition:

Carbon0.80 – 1.20 %
Silicon0.40 – 1.50 %
ManganS070 – S110 0.35 – 1.20%
S170 0.50 – 1.20%
S230 – S660 0.60 – 1.20%

Physical properties:

MicrostructureUniform martensite tempered to a degree consistent with the hardness range.
Hardness41 – 51 HRC. Other hardnesses available upon request.
DensityThe specific density of cast steel shot shall not be less than 7 gm/cc.

Steel Shot is widely to clean metal surface, especially by shot blasting machine (wheel). Steel Shot provides a greater penetration effect because of the smaller point of contact.

Steel Shot Granular Distribution

SAE S-780 S-660 S-550 S-460 S-390 S-330 S-280 S-230 S-170 S-110 S-70
KS – JIS S-240 S-200 S-170 S-140 S-120 S-100 S-80 S-70 S-60 S-40 S-30
Sung-Ho SH-240 SH-200 SH-170 SH-140 SH-120 SH-100 SH-80 SH-70 SH-60 SH-40 SH-30
No Mm 2.40 2.00 1.70 1.40 1.20 1.00 0.80 0.70 0.60 0.40 0.30
7 2.80 All pass
8 2.36 All pass
10 2.00 85% min All pass All pass
12 1.70 97% min 85% min 5% max All pass
14 1.40 97% min 85% min 5% max All pass
16 1.18 97% min 85% min 5% max All pass
18 1.00 96% min 85% min 5% max All pass
20 0.85 96% min 85% min 10% max All pass
25 0.71 96% min 85% min 10% max
30 0.60 96% min 85% min All pass
35 0.50 97% min 85% min 10% max
40 0.425 97% min All pass
45 0.355 80% min 10% max
50 0.300 90% min
80 0.180 80% min
120 0.125 90% min

Grain size comparison – Steel Shot

S-780/SH-240 Size 2.5mm
S-780/SH-240 Size 2.5mm
S-660/SH-200 Size 2.0mm
S-660/SH-200 Size 2.0mm
S-550/SH-170 Size 1.70mm
S-550/SH-170 Size 1.70mm
S-460/SH-140 Size 1.40mm
S-460/SH-140 Size 1.40mm
S-390/SH-120 Size 1.20mm
S-390/SH-120 Size 1.20mm
S-330/SH-100 Size 1.00mm
S-330/SH-100 Size 1.00mm
S-280/SH-80 Size 0.80mm
S-280/SH-80 Size 0.80mm
S-230/SH-70 Size 0.70mm
S-230/SH-70 Size 0.70mm
S-170/SH-40 Size 0.40mm
S-170/SH-40 Size 0.40mm
S-110/SH-30 Size 0.30mm
S-110/SH-30 Size 0.30mm

Steel Shot

Steel Grit

Low Carbon Bainite Steel Shot

Steel Grit for Granite Cutting

Stainless Steel Shot

Stainless Steel Cut Wire

Zinc Shot

Zinc Cut Wire

Alumunium Cut Wire

Aluminum Shot

Copper Cut Wire

Steel Balls

Steel Cut Wire

Steel Slags

For further information, you can contact our Sales Engineer, or you can contact us directly or here.