Stainless Steel Cut Wire is a popular alternative for peening applications where a higher level of abrasive hardness is desirable or when components to be peened have a high level of inherent hardness. The ideal peening media should contain particles of identical size, shape, hardness and density in order to produce repeatable peening results.
Stainless steel cut wire is manufactured from wire strand, cut to lengths equal to its diameter. These results in particles virtually identical in size, shape, hardness and density and thus a media ideally suited for peening purposes. It will work harden the more it is used during the operation and lead to an extremely long abrasive life span.
Chemical Composition :
| C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|
| 0.030 max | 2.00% max | 1.0% max | 0.043 max | 0.02% | 17 - 19 % | 8-12% |
Mechanical Properties:
| Hardness | 425 - 475 HV |
| Spec Gravity | 7.1 kg/m3 |
| Bulk Density | 4.2 kg/m3 |
| Size | 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm dan 1.0mm |
| Application | Deburring and polishing (pemolesan) non-ferrous components, Shot peening ferrous and non-ferrous components etc. |
For further information, you can contact our Sales Engineer, or you can contact us directly or here.