High Pressure SandBlasting Nozzle

Nozzle material selection depends on many factors including which abrasive applied, how often the blasting job is done, the size of the job and the rigors of the job site. Here are general nozzle material choosing guidelines for various materials from our portfolio.

  1. Tungsten Carbide (XTC©) Nozzles offer long life and economy when rough handling can not be avoided and mineral or coal slag or steel grit abrasives are used. We have 2 grades of XTC , oriented to different budgets: XTC, the top wear grade and TiC-TC, the economical but slightly-inferior-in-service-life solution.

 

  1. Silicon Carbide (XSC©) Nozzles offer service life and durability max. double tungsten carbide provided rough handling is avoided, but are only about half the weight. Our XSC nozzles are an excellent choice for those operators on long-period job and prefer a lightweight nozzle.

 

  1. Hot-pressed Boron Carbide (XHB©) Nozzles provide long life with optimum air and abrasive use. XHB, the 2nd hardest manned materials only after diamond, is ideal for aggressive abrasives such as aluminum oxide and selected mineral aggregates when rough handling can be avoided. XHB will typically outwear tungsten carbide by five to ten times.

 

  1. Self-sintered Boron Carbide (XSB©) Nozzles serve as an economical substitute for XHB nozzles when they are operated with other mild media than alumina and selected mineral aggregates. XSB is tougher than XHB, so stronger against rough handling than the latter.

For optimum productivity, the nozzle bore size is selected based on the desired blast pressure and the available air pressure and flow. In addition to the blast nozzle, the compressor is supplying air to an air helmet and other components such as air motors and pneumatic controls, generally with 20% of its air capacity.

Please download catalogues for High Pressure Nozzle for SandBlasting:

High Pressure Nozzle (Digital Catalogue)

Convetional Long Venturi Nozzles Convetional Long Venturi Nozzles Convetional Long Venturi Nozzles
Ultra Long
Venturi Nozzles		 Ultra Long
Venturi Nozzles		 Ultra Long
Venturi Nozzles
Medium Venturi
Nozzle		 Angle Nozzles Angle Nozzles
Angle Nozzles Water
Induction Nozzles		 Water
Induction Nozzles
Nozzle with
Brass Thread		 Long Double Ventruri Nozzle Stick Up
Nozzle
Stick Up
Nozzle		 Stick Up
Nozzle		 Short Straight
Bore Nozzle with Fine Thread
Short Straight
Bore Nozzle with Large Thread		 Long Straight
Bore Nozzles		 Lead In Nozzle
Flatjet Nozzle Flatjet Nozzle Flatjet Nozzle
FishTail Nozzle Fish Tail
Nozzle & Flatjet nozzle		 Injector
Nozzle
Injector
Nozzle		 Banana Nozzle
with Adaptor		 Adaptor for
Banana Nozzle
Pipe Inside
Blast Nozzle
Tungsten
Carbide (XTC©) Nozzles		 Silicon
Carbide (XSC©)		 Hot-pressed
Boron Carbide (XHB©) Nozzles		 Self-sintered
Boron Carbide (XSB©) Nozzles
High Pressure SandBlasting Nozzle Low Pressure SandBlasting Nozzle SandBlasting Machine type SandBlasting Cabinet SandBlasting Machine type SandBlasting Pot Mass Polishing Tools (Surface Finishing)
SandBlasting Machine type Shot Blasting Machine & Spareparts SandBlasting Equipment (Nylon Nozzle/Coupling/Portable Internal Pipe Tool & SandBlasting Gun) SandBlasting Safety Equipment (Blast Suit, Helmet, Hood, Gloves, Breathing Air Filter) Focusing Tube (Water Jet Nozzles)

Please see our Sandblasting media:

Sand Blasting Media (Steel) Sand Blasting Media (Stainless Steel) Sand Blasting (Mineral) media Sand Blasting Plastic media
Mass Polishing (Surface Finishing) Media Grinding Media (Ceramic) Abrasive Grain Products

For further information, you can contact our Sales Engineer, or you can contact us directly or here.