CERAMIC FIBER BLANKET is made of special ceramic long-fiber that is produced by the melting of very pure raw materials in double surface needling process without binders and with good stability in a large range of temperature. The process of double surface needling increases interweaving and tensile strength.
TYPICAL APPLICATIONS OF BLANKET
Acoustical service and fire protection, Soaking pit seals, Expansion joint packing, Linings and seals for oven and furnace, High temperature gasketing, Process furnace linings: heaters, reformers, ethylene cracking, heat-treating, etc.
Technical Specification:
| Ceramic Fiber Blanket 1100°C | Ceramic Fiber Blanket 1260°C | Ceramic Fiber Blanket A 1400°C | Ceramic Fiber Blanket Z 1400°C | ||
| Working Temp Rating (°C) | 1100 | 1260 | 1400 | 1400 | |
| Continuous Use Limit (°C) | 1000 | 1100 | 1200 | 1350 | |
| Colour | White | White | White | White | |
| Density (Kg/m3) | 64/96/128 | 64/96/128 | 128/160 | 128/160 | |
| Permanent Linear Change (%) at (24h.128Kg/m3) | -3 (1000°C) | -3 (1100°C) | -3 (1200°C) | -3 (1350°C) | |
| Thermal conductivity (W/m.K)
(Density 128 Kg/m3) |
0.09（400°C) | 0.09 (400°C) | 0.12 (600°C) | 0.16 (800°C) | |
| 0.16(800°C) | 0.16 (800°C) | 0.2 (1000°C) | 0.20 (1000°C) | ||
| Tensile Strength (MPa) | 0.04 | 0.04 | 0.04 | 0.04 | |
| Chemical Analysis（%) | |||||
|
|
Al2O3 | 46 | 47-49 | 52-55 | 39-40 |
| Al2O3+SiO2 | 97 | 99 | 99 | * | |
| Al2O3+SiO2+ZrO2 | 99 | ||||
| ZrO2 | 15-17 | ||||
| Fe2O3 | <1.0 | 0.2 | 0.2 | 0.2 | |
| Na2O+K2O | <=0.5 | 0.2 | 0.2 | 0.2 | |
| Standard Sizes (mm) | 7200/3600×600/610×12.5-50. Other sizes available upon request | ||||
For further information, you can contact our Sales Engineer, or you can contact us directly or here.