The equipment adopts compressed air as power to spray the abrasive at high speed to the surface to be treated, after the abrasive impact, the surface of the workpiece rust stains, sand, black skin, paint, oxide skin and other debris stripped clean to restore the metal or non-metallic workpiece color, the surface to get the cleanliness and roughness required by the process, through the sand and dust separation system will be automatically sorted out the separation of sand and dust, sorted out of the abrasive material to continue to circulate the use of dust and rust stains, sand income dust collection barrels. Under the control of the handle switch, the equipment sandblasting, recycling, sand and dust separation, sand recycling, dust filtration and all other work "in one go".
RSM-150 Recycling Type Sand Blasting Machine
- Working pressure : 2-7 bar
- Diameter of sand blasting bin : Φ 600mm
- Refill bin diameter : Φ 600 mm
- Power supply voltage : AC380V,50HZ
- Power supply : 7.5 kw
- Air consumption : 3.6 m³/min
- Working radius :10m
- Abrasive rate : 16-150 mesh
- Type of abrasive : Garnet/steel shot
- Nozzle diameter range : 6-8 mm
- Surface cleanliness : Sa2.5-Sa3(GB8923-88)
- Surface roughness : 40-70 um (GB1031-83)
- Working efficiency : 4-5 ㎡/h
- Control mode : Can be chained with auxiliary equipment
- Filtration method : Cartridge filtration
- Filter area : 12㎡
RSM-180G Recycling Type Sand Blasting Machine
- Working pressure : 2-7 bar
- Diameter of sand blasting bin : Φ 600mm
- Refill bin diameter : Φ 600mm
- Power supply voltage : AC380V,50HZ
- Power supply : 11 kw
- Air consumption : 5 m³/min
- Working radius : 20 m
- Abrasive rate : 16-150 mesh
- Type of abrasive : Garnet/steel shot
- Nozzle diameter range : 8-10 mm
- Surface cleanliness : Sa2.5-Sa3(GB8923-88)
- Surface roughness : 40-70 um (GB1031-83)
- Working efficiency : 7-8 ㎡/h
- Control mode : Can be chained with auxiliary equipment
- Filtration method : Cartridge filtration
- Filter area : 12㎡
RSM-180G Recycling Type Sand Blasting Machine
- Working pressure : 2-7 bar
- Diameter of sand blasting bin : Φ 600mm
- Refill bin diameter : Φ 600mm
- Power supply voltage : AC380V,50HZ
- Power supply : 15 kw
- Air consumption : 5 m³/min
- Working radius :20 m
- Abrasive rate : 16-150 mesh
- Type of abrasive : Garnet/steel shot
- Nozzle diameter range : 8-10 mm
- Surface cleanliness : Sa2.5-Sa3(GB8923-88)
- Surface roughness : 40-70 um (GB1031-83)
- Working efficiency : 7-8 ㎡/h
- Control mode : Can be chained with auxiliary equipment
- Filtration method : Cartridge filtration
- Filter area : 12-15㎡
Performance Characteristics
- Dust-free and environmentally friendly design Automatic recovery and separation of paint, oxidized skin, sand dust and rust stains, and recycling of abrasives.
- Dust and dirt free operation The actual test on the paint dust recovery rate is 99%.
- Blowback Protection The blowback system automatically removes cartridge dust to protect cartridge life.
- Surface treatment grade Sa2.5-3 grade is available.
- Increased working radius Working radius up to 60 meters.
- Safe and convenient control Remote wireless remote control (DC24V).
- Vehicle-mounted mobile design Easy to move around the sand blasting site.
- Equipped with light wear-resistant sand flow pipeline, workers save labor.
Please watch our Mobile Recyclable Sandblasting Machine here
| Sandblasting pot | Mobile Recyclable Sandblasting Machine |
Please see our catalogues as below:
Please see our Sandblasting & Shot Blasting Equipments:
Please see our Sandblasting media:
For further information, you can contact our Sales Engineer, or you can contact us directly or here.