IND | EN

Picture 3.9.2.0 - 01
Picture 3.9.2.0 - 02

Rockwool board is made of select fine basalt as the major materials which is pulled into non-continuous fibers after melted by adopting advanced four-roller centrifugal cotton-making procedures and adding a certain of thermosetting binder, dust laying oil and water repellent into rock wool fibers.

Technical Properties Rockwool Board

Description ROCKWOOL BOARD
Density (kg/m3) 80-160
Melting Temperature (' C ) >1000
Compressive Strength ((kPa 10% relative deformation) >40
Tensile Strength (kPa) >80
Acidity coefficient >1.8
Hydrophobicity (%) >98
Hygrosco picit y (%) <1.0
Water absorption (kg/m2 partial immersion)

Short term (24h) s 1.0

Long term (28d) s 3.0

Permanent Linear Shrinkage (%) 750o C x0.5h <8
Mass Loss (%) 750o C x0.5h <10
Thermal Conductivity (W/m·K, 25' C ) < 0.04
Thickness Tolerance (mm ) 3
Flatness Tolerance (mm) <5
Standard Size (mm) 1200x600x(25-100)

Rockwool Board with Alumunium Foil
Rockwool Board with Alumunium Foil
Rockwool Board with Alumunium Foil
Rockwool Board with Alumunium Foil

Features

  • Excellent thermal insulation property.
  • Superior sound absorption performance
  • Convenient handling and installation.

Typical Application

  • Heat and cold insulation of various types of tank or silo.
  • Sound absorption for boiler, heat reservoir, fire-proof duct and equipments in insulation machine chamber.
  • Thermal insulation of heating facilities such as oven, heater, high-pressure boiler and turbine.
  • Exterior insulation for factory roof, heating insulation, heating press and tank roof.
  • Thermal insulation and prevention of dew for house and building.
  • Sound absorption and insulation for broadcasting room, partition core for sound absorption and fireproofing
  • Sound absorption wall, room and core of fireproofing structure, safing insulation of curtain wall.
  • Exterior insulation of apartment and prevention of impact noise and floor vibration.
  • Thermal insulation of concrete slab floor and roof deck.

For further information, you can contact our Sales Engineer, or you can contact us directly or here.