Melt Extract Steel Fibers

Picture 3.4.2.1 - 01
Picture 3.4.2.1 - 02
Picture 3.4.2.1 - 03

Melt Extracted Stainless Steel Fibers are used to increase the strength of refractory materials against thermal shock and mechanical shock. The additional rate of ME Steel Fiber  3-4% by weight of refractory material.

The advantages of Melt Extracted Stainless Steel Fibres are:

  • Increases the surface resistance by 1.75 - 2.72 times
  • Increases the crack resistance by 1-4 times

Dimensions:

Length 20 mm 25 mm* 30 mm 35 mm
Width 0.5 – 1.0 mm 0.5 – 1.0 mm 0.5 – 1.0 mm 0.5 – 1.0 mm
Thickness 0.2 – 0.75 mm 0.2 – 0.75 mm 0.2 – 0.75 mm 0.2 – 0.75 mm

*Common type

The usege of ME Steel Fibres in Cement Industry

Cold Drawn Fibre

Stainless Steel Wool

Steel Anchor for Refractory (Castable & Gunning)

Steel & Ceramic Anchor for Ceramic Fibre/Mineral Wool/Calcium Silicate

Please see our Digital Catalogues


Refractory Products PT Mitra Utama Lestari Abadi
Products for Cement Industry PT Mitra Utama Lestari Abadi
Insulating Products PT Mitra Utama Lestari Abadi
Refko Recovery System PT Mitra Utama Lestari Abadi
Conventional Castable – Monolithic Refractories Low Cement Castable – Monolithic Refractories Silicon Carbide Castable/Gunning – Monolithic Refractories Free Flowing – Monolithic Refractories Non Wetting Castable for Aluminium & Copper
Wear Resistant – Monolithic Refractories Gunning Material – Monolithic Refractories Insulation Material – Monolithic Refractories Plastic Ramming Material Phosphate Bonded Wet Mortar
EcoGel – Monolithic Refractories Refko Recovery System (Veneering System) Dense Gunning/SuperGun System ZSI - Product Series Vibrolit Casting
Semi Insulating SuperGun System Refko Fibres Refko Seal Anchors Refko Bolt Anchors

For further information, you can contact our Sales Engineer, or you can contact us directly or here.