IND | EN

Picture 3.9.1.5 - 01
Picture 3.9.1.5 - 03
Picture 3.9.1.5 - 02
Picture 3.9.1.5 - 04

CERAMIC FIBER MODULES is made of pre-cut or folded Ceramic Fiber Blanket stack bonded to form a module with cut edges exposed. The MODULE contains no any binders. It uses special equipment for producing MODULES to confirm the precise dimensions. Module is fixed by ANCHOR. It's easy to install

TYPICAL APPLICATIONS OF MODULES

  • Iron & steel: heating furnace, ladle
  • Stack lining
  • Boiler Insulation
  • Petrochemical industry: cracking furnace, platform furnace, coked furnace, flue, normal and reducing pressure furnace
  • Other industrial furnace such as heat-treatment furnace, holding furnace, ceramic kiln and kiln car.

Steel Anchor for Ceramic Fiber Module

Picture 3.9.1.5 - 05
Picture 3.9.1.5 - 07
Picture 3.9.1.5 - 06
Picture 3.9.1.5 - 08

Technical Specification:

  Ceramic Fiber Modules 1100°C Ceramic Fiber Modules 1260°C Ceramic Fiber Modules A 1400°C Ceramic Fiber Modules Z 1400°C
Working Temp Rating(°C)

1100

1260

1400

1400

Continuous Use Limit (°C) 1000 1100 1200 1350
Colour White White White White
Density (Kg/m3) 130/160/190/240 130/160/190/240 130/160/190/240 130/160/190/240
Chemical Analysis (%)
 

 

 

 

Al2O3 46 47-49 52-55 39-40
Al2O3+SiO2 97 99 99 *
Al2O3+SiO2+ZrO2 99
ZrO2 15-17
Fe2O3 <1.0 0.2 0.2 0.2
Na2O+K2O <=0.5 0.2 0.2 0.2
Standard Sizes (mm)

300×300×250(anchoring-structure), 600×24-300×100-200(no anchoring-structure). Anchor available: SUS 304 & SUS 310. Other sizes available upon request

Untuk informasi lebih lanjut bisa menghubungi Sales Engineer kami, atau bisa menghubungi kami secara langsung atau di sini.