Ceramic Tube – Alumina Wear Resistant Ceramic Wear

IND | EN

Series Wear Resistant Ceramic Tube are mainly used as the lining in the pipeline of conveying ore fines, cement, coal and other hard material. Compared with alumina ceramic tile, the installation cost is much lower and the life is much longer.

ISO Pressed alumina is an extremely dense ceramic material that has excellent resistance to both sliding and impact abrasion. The exceptional toughness and durability of alumina pipe has made it the recognized standard for long term economic lining in industrial equipment subject to high wear. ISO Pressed alumina ceramic lining is ideally suited for the most demanding slurry and pneumatic applications.

Specification

Technical	TAT 92	TAT 95
Al₂O₃ Content (%)	≥92	≥95
Fe₂O₃ Content (%)	≤0.2	≤0.15
Hardness (Mohs)	9	9
water Absorption（%）	≤0.02	≤0.02
Density（g/cm3）	≥3.60	≥3.65

Size

Specifications (mm)	Outer Diameter (mm)	Inner Diameter (mm)	Thickness (mm)
Φ 25	Φ 25	Φ 10	7.5
Φ 30	Φ 30	Φ 15	7.5
Φ 40	Φ 40	Φ 20	10
Φ 50	Φ 50	Φ 37	6.5
Φ 65	Φ 65	Φ 52	6.5
Φ 80	Φ 80	Φ 67	6.5
Φ 100	Φ 100	Φ 84	8
Φ 125	Φ 125	Φ 109	8
Φ 150	Φ 150	Φ 134	8
Φ 200	Φ 200	Φ 184	8
Φ 250	Φ 250	Φ 230	10
Biggest OD is up to 500mm and the wall thickness is from 6mm up to 50mm.