Magsol is basic refractory mix for the Hearth of EAF lining and hot maintenance in melting furnaces. Being its application dry, no preheating is required. The vibration or ramming in consecutive layers, will provide a highly monolithic mix with a high density and performance during melting operation.
Magsol does not contain any fluxes or addities. During the installation, it will produce material with characteristics of dense, abrasive resistance and resistant to penetration of molten metal.
Magsol has excellent chemical composition due its ratio CaO/SiO and its content of Fe2O3 which ensure the adequate sinterization which lead to a high density of melted layer > 3 g/cm3 and very low porosity (< 10% = resistance and stability).
Magsol 115/125/145
Its is a premium dry ramming product for big furnace capacity (> 40MT).
Magsol GR
Its is a premium dry ramming product for big furnace capacity (25 - 35MT).
Magsol GRA
It is a premium repair (intermediate repair) product for dry ramming. It is widely used for repair material for bottom furnace.
For more information at https://www.magnesitasnavarras.es/
For further information, you can contact our Sales Engineer, or you can contact us directly or here.