Series Wear Resistant Ceramic Tube are mainly used as the lining in the pipeline of conveying ore fines, cement, coal and other hard material. Compared with alumina ceramic tile, the installation cost is much lower and the life is much longer.
ISO Pressed alumina is an extremely dense ceramic material that has excellent resistance to both sliding and impact abrasion. The exceptional toughness and durability of alumina pipe has made it the recognized standard for long term economic lining in industrial equipment subject to high wear. ISO Pressed alumina ceramic lining is ideally suited for the most demanding slurry and pneumatic applications.
Specification
| Technical | TAT 92 | TAT 95 |
| Al2O3 Content (%) | ≥92 | ≥95 |
| Fe2O3 Content (%) | ≤0.2 | ≤0.15 |
| Hardness (Mohs) | 9 | 9 |
| water Absorption（%） | ≤0.02 | ≤0.02 |
| Density（g/cm3） | ≥3.60 | ≥3.65 |
Size
| Specifications (mm) | Outer Diameter (mm) | Inner Diameter (mm) | Thickness (mm) |
| Φ 25 | Φ 25 | Φ 10 | 7.5 |
| Φ 30 | Φ 30 | Φ 15 | 7.5 |
| Φ 40 | Φ 40 | Φ 20 | 10 |
| Φ 50 | Φ 50 | Φ 37 | 6.5 |
| Φ 65 | Φ 65 | Φ 52 | 6.5 |
| Φ 80 | Φ 80 | Φ 67 | 6.5 |
| Φ 100 | Φ 100 | Φ 84 | 8 |
| Φ 125 | Φ 125 | Φ 109 | 8 |
| Φ 150 | Φ 150 | Φ 134 | 8 |
| Φ 200 | Φ 200 | Φ 184 | 8 |
| Φ 250 | Φ 250 | Φ 230 | 10 |
| Biggest OD is up to 500mm and the wall thickness is from 6mm up to 50mm. | |||
For further information, you can contact our Sales Engineer, or you can contact us directly or here.